Engraved Builders Nameplate Commissioning Plaque

Rating:
100% of 100
£18.79
In stock
SKU
bulidersnameplate

Maximum 25 characters

Maximum 25 characters

Maximum 2 characters

Maximum 20 characters

Maximum 4 characters

Maximum 2 characters

Builders nameplate commissioning plaque in CNC engraved Laminated Plastic Sized at approx. 145mm x 110mm

In various colours - Gold/Black text, Silver/Black text, Red/White text, Yellow/Black text, White/Black text or Blue with white text.. (

Other sizes and layouts can be made, just send us your requirements.

Builders nameplate commissioning plaque in CNC engraved Laminated Plastic Sized at approx. 145mm x 110mm

In various colours - Gold/Black text, Silver/Black text, Red/White text, Yellow/Black text, White/Black text or Blue with white text.. (

Other sizes and layouts can be made, just send us your requirements.

More Information
ConditionNew
ManufacturerThe Graphics Boat
Extended DescriptionProfessional Grade - Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material.
Write Your Own Review
You're reviewing:Engraved Builders Nameplate Commissioning Plaque
Your Rating
Copyright 2007-2020 The Graphics Boat - All Rights Reserved. Copy our idea's and artwork at your peril - our propeller is very sharp.... VAT Number 343235914