Special Order - S Snelling
Please do not use unless your surname is listed below and instructed by VCG Group staffs.
Customer: S Snelling
Mermaid Paint Mask Stencils – Approved Artwork
Two paint masks will be supplied as rectangular sheets, with the mermaid design cut out as a void within the mask.
The paint mask is applied to the boat, and the chosen paint is painted through the cut-out areas. Once the paint mask is removed, the painted mermaid design on the boat will look like the blue in my design proof.
The blue colour shown in our design proof is for illustration purposes only and represents the area that will be painted. The actual finished mermaids will therefore appear in whatever paint colour you paint in the void of the design.
This order includes:
-
Vector EPS artwork redraw
-
2 × paint mask stencils
-
Approximate finished design size: 700mm high × 540mm wide
-
Paint mask size: approximately 740mm × 580mm each
As per ticket correspondence Ticket #249741 and approved design proof
Please do not use unless your surname is listed below and instructed by VCG Group staffs.
Customer: S Snelling
Mermaid Paint Mask Stencils as approved Artwork
As per ticket correspondence Ticket #249741 and the approved design proof
| Condition | New |
|---|---|
| Manufacturer | The Graphics Boat |
| Extended Description | Our cut vinyls are made from Premium, Marine Safe Vinyl, Polymeric vinyl rated for 7-10 Year. Actual lifespan depends on climate, UV exposure and other facors. Printed vinyls come laminated as standard for UV/abrasion protection. Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided. Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |