Your own image - Printed Self Adhesive Sticker (Marine Safe) - Yacht / Boat Sponsor Signs
Enhance the look of your Boat with these fantastic printed panel stickers using your own photo.
IMPORTANT - Your file must be a bare minimum resolution of at least 300dpi. As a guide, If you zoom in on your image so that part of it appears at the size that you want it printed, then that will give you a guide as to how it will look. Pixelated images cannot be 'upgraded' to print better.
- All the selectable sizes are based upon the aspect ratio of a standard 6x4 photo
- If you have copied a small image of the internet somewhere, chances are it will not be good enough. If unsure, send us the image via email first to check for you.
- All prints are laminated as standard
Enhance the look of your Boat with these fantastic printed panel stickers using your own photo. Suitable for outdoor and marine use - use to decorate boats of all kinds and use as sponsor graphics on yachts and other marine vessels.
- All the selectable sizes are based upon the aspect ratio of a standard 6x4 photo
- If you have copied a small image of the internet somewhere, chances are it will not be good enough. If unsure, send us the image via email first to check for you.
- IMPORTANT - Your file must be a bare minimum resolution of at least 300dpi. As a guide, If you zoom in on your image so that part of it appears at the size that you want it printed, then that will give you a guide as to how it will look. Pixelated images cannot be 'upgraded' to print better.
- All prints are laminated as standard
Condition | New |
---|---|
Manufacturer | Vinyl Cut Graphics |
Extended Description | Our cut vinyls are made from Premium, Marine Safe Vinyl, Polymeric vinyl rated for 7-10 Year. Actual lifespan depends on climate, UV exposure and other facors. Printed vinyls come laminated as standard for UV/abrasion protection. Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided. Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |