We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
BRASS Custom Engraved Boat Builders Hull Plate
£43.65
Out of stock
SKU
bulidplateBrass
NOTE THIS PICTURE IS OF THE PLASTIC VERSION AND WILL BE REPLACED SHORTLY WITH AN EXAMPLE BRASS PLATE.
Builders nameplate commissioning plaque in engraved Brass Sized at approx. 145mm x 110mm
Other sizes and layouts can be made, just send us your requirements.
Boat Builders nameplate / commissioning plate in Brass Sized at approx. 145mm x 110mm. Custom engraved from 1.2mm thick Brass sheet and cut into an oval or rectangular shape.
custom versions are available including pocket cut so that the lettering is raised from the plate, other sizes and layouts can be made, just send us your requirements.
We can also carve wooden plaques to order.
| Condition | New |
|---|---|
| Manufacturer | The Graphics Boat |
| Extended Description | Our cut vinyls are made from Premium, Marine Safe Vinyl, Polymeric vinyl rated for 7-10 Year. Actual lifespan depends on climate, UV exposure and other facors. Printed vinyls come laminated as standard for UV/abrasion protection. Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided. Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |
Write Your Own Review
Related Products
