Sealine 290 Boat Logo Sticker
High-Quality Replacement Sealine 290 Decal
Restore your Sealine 290 to its original glory with this precision-cut marine decal. Whether you are performing a full hull restoration or simply replacing a sun-bleached badge, this decal is perfect.
Key Features
-
Design: Features the classic, stylised grey Sealine "S" flourish integrated with the signature block-italic 290 model red numbering.
-
Marine-Grade Durability: Manufactured from high-quality, UV-resistant vinyl designed to withstand harsh saltwater environments, fuel spills, and direct sunlight.
-
Precision Cut: Clean, sharp edges with no background "ghosting," providing a professional, painted-on look once applied.
-
Easy Application: Supplied with transfer tape
- Size; Approx 150mm x 300mcm
High-Quality Replacement Sealine 290 Decal
Restore your Sealine 290 to its original glory with this precision-cut marine decal. Whether you are performing a full hull restoration or simply replacing a sun-bleached badge, this decal is perfect.
Key Features
-
Design: Features the classic, stylised grey Sealine "S" flourish integrated with the signature block-italic 290 model red numbering.
-
Marine-Grade Durability: Manufactured from high-quality, UV-resistant vinyl designed to withstand harsh saltwater environments, fuel spills, and direct sunlight.
-
Precision Cut: Clean, sharp edges with no background "ghosting," providing a professional, painted-on look once applied.
-
Easy Application: Supplied with transfer tape
- Size; Approx 150mm x 300mcm
| Condition | New |
|---|---|
| Manufacturer | Vinyl Cut Graphics |
| Extended Description | Professional Grade - Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |