SSR Boat Number Stickers (Pair) 30mm Tall
SSR Small Ships Register Registration Number Sticker. Sized to meet DOT requirements (30mm Tall).
Our popular Pre spaced cut vinyl numbers are ready to apply to your boat in one piece.
Specification of SSR numbers for small boats
SSR Numbers are required to be a minimum of 30mm tall, in an easily readable font. This product meets the minimum requirement. You can choose larger SSR numbers if required (see other products under SSR)
"You must ensure that your vessel is marked with its registered number (including the prefix "SSR"). This must be painted on, or fixed to the exterior of the hull, deck or superstructure where it can be readily seen.
Each digit of the number should be a minimum of 30mm in height and 20mm in width, except for the number 1, which should be 5mm in width and have a thickness of 5mm with a space of 5mm between each digit."
SSR Small Ships Register Registration Number Sticker. Sized to meet DOT requirements (30MM Tall). Our popular Pre spaced cut vinyl numbers are ready to apply to your boat in one piece in Marine Grade Vinyl.
SSR Registration - for more information visit the MCA Here
Govenment Page on Boat Registration - https://www.gov.uk/register-a-boat/the-uk-ship-register
|Manufacturer||The Graphics Boat|
|Extended Description||Professional Grade - Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material.|